Netgear GSM7224v1 GSM7212 Command line reference manual - Page 31
Table 2-5. CLI Command Modes continued
View all Netgear GSM7224v1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
Command Line Interface Reference for the ProSafe 7200 Series Layer-2 Switches, Software Ver- Table 2-5. CLI Command Modes (continued) Command Mode Prompt Interface Config Switch (Interface )# Line Config Switch (line)# Policy Map Config Switch (Config policy-map)# Policy Class Config Switch (Config policy-class-map)# Class Map Config Switch (Config class-map)# Router OSPF Config Router RIP Config Switch (Config router)# Switch (Config router)# MAC Access-list Config Switch (Config mac-access-list)# DHCP Pool Config Switch (Config dhcp-pool)# Stack Global Config Mode Switch (Config stack)# Mode Description Allows you to enable or modify the operation of an interface and provides access to the router interface configuration commands. Use this mode to set up a physical port for a specific logical connection operation. Allows you to configure various telnet settings and the console interface. Allows you to access the QoS Policy-Map configuration mode to configure the QoS Policy-Map. Consists of class creation, deletion, and matching commands. The class match commands specify Layer 2, Layer 3, and general match criteria. Allows you to access the QoS Class-Map configuration mode to configure QoS class maps. Allows you to access the router OSPF configuration commands. Allows you to access the router RIP configuration commands. Allows you to create a MAC Access-List and to enter the mode containing Mac AccessList configuration commands. Allows you to access the DHCP Pool configuration. Allows you to access the Stack Global Config Mode. Overview 2-7 v1.0, February 2007