Netgear GSM7224v1 GSM7212 Command line reference manual - Page 26
Using the Command-Line Interface
View all Netgear GSM7224v1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
Command Line Interface Reference for the ProSafe 7200 Series Layer-2 Switches, Software Ver- 7200 Series Managed Switch software includes a set of comprehensive management functions for managing both the switch and the network. You can manage the 7200 Series Managed Switch software by using one of the following three methods: • Web-based • VT100 interface • Simple Network Management Protocol (SNMP) Each of the management methods enables you to configure, manage, and control the software locally or remotely using in-band or out-of-band mechanisms. Management is standards-based, with configuration parameters and a private MIB providing control for functions not completely specified in the MIBs. 2.3 Using the Command-Line Interface The command-line interface (CLI) is a text-based way to manage and monitor the system. You can access the CLI by using a direct serial connection or by using a remote logical connection with telnet or SSH. This section describes the CLI syntax, conventions, and modes. It contains the following topics: • Section 2.3.1 "Command Syntax" on page 2-2 • Section 2.3.2 "Command Conventions" on page 2-3 • Section 2.3.3 "Unit-Slot-Port Naming Convention" on page 2-5 • Section 2.3.4 "Using the "No" Form of a Command" on page 2-6 • Section 2.3.5 "Command Modes" on page 2-6 • Section 2.3.6 "Entering CLI Commands" on page 2-9 • Section 2.3.7 "Using CLI Help" on page 2-10 • Section 2.3.8 "Accessing the CLI" on page 2-11 2.3.1 Command Syntax A command is one or more words that might be followed by one or more parameters. Parameters can be required or optional values. 2-2 Overview v1.0, February 2007