Olympus E-300 EVOLT E-300 Advanced Manual (English) - Page 153
If an error code is displayed
UPC - 050332298859
View all Olympus E-300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 153 highlights
Direct printing (PictBridge) If an error code is displayed ● If an error code is displayed during direct printing setting or printing, see the following table. ● For more details on solutions, refer to the printer's instruction manual. ● If other codes are displayed, refer to "Error codes" (P. 174). Monitor indication Possible cause Corrective action The camera is not connected Disconnect the camera and to the printer correctly. connect it again correctly. NO CONNECTION There is no paper in the printer. Load some paper in the printer. NO PAPER The printer has run out of ink. Replace the ink cartridge in the printer. NO INK The paper is jammed. Remove the jammed paper. 9 JAMMED Printing SETTINGS CHANGED The printer's paper cassette has been removed or the printer has been manipulated while making settings on the camera. Do not manipulate the printer while making settings on the camera. PRINT ERROR There is a problem with the printer and/or camera. Turn off camera and printer. Check the printer and remedy any problems before turning the power on again. CANNOT PRINT Pictures recorded on other cameras may not be printed on this camera. Use a personal computer to print. 153