Olympus E-300 EVOLT E-300 Advanced Manual (English) - Page 178

If you encounter problems Possible cause The picture is blurred. Corrective action Ref. Page A subject unsuited to AF was taken Use manual focus or focus lock to focus on the subject and then shoot. P. 30, 83 The camera moved when Camera vibrations will result in a blurred picture. - the shutter button was Hold the camera correctly and press the shutter pressed. button gently. When a telephoto lens is used, special care is needed. ISO is set to auto in a dark environment. The camera is more likely to move with slower shutter speeds. Use the flash or set a higher ISO sensitivity. The use of a tripod is also recommended. P. 54, 91 The lens was dirty. The picture is too bright. Clean the lens. Use a commercially available blower blush and then wipe with a lens cleaner to remove dust. Mold may form on the lens surface if the lens is left dirty. P. 181 There was something dark in the center of the image. When there is something dark in the center of the image, the edges of the image will be brighter regardless of the metering system. Adjust the exposure toward -. P. 88 The ISO setting is high. Set ISO to auto or 100. If there is no improvement, use an ND filter. P. 91 A low aperture value is set Increase the aperture value. Or set the in the A (M) mode. exposure mode to the P mode. P. 43, 45 11 A slow shutter speed is set in the S (M) mode. Increase the shutter speed. Or set the exposure mode to the P mode. P.43, 47 Appendix 178