Olympus E-300 EVOLT E-300 Advanced Manual (English) - Page 62
Using the electronic flash
UPC - 050332298859
View all Olympus E-300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
Flash shooting Using the electronic flash The following instructions describe how to connect and use the FL-50 electronic flash (optional). Be sure to attach the flash to the camera before turning on the flash's power. Available modes P A S M 1 Remove the hot shoe cover by sliding it in the direction indicated by the 4 arrow in the illustration. ● Keep the shoe cover in a safe place to avoid losing it, and put it back on the camera after flash shooting. Various shooting functions 2 Attach the FL-50 electronic flash to the hot shoe on the camera. ● If the lock pin is protruding, turn the shoe lock dial as far as it will go in the direction opposite to ß LOCK. This will pull the lock pin back inside. ● For instructions on how to attach the flash, refer to the FL-50's manual. Lock pin Shoe lock dial 3 Turn on the flash. ● When the charge lamp on the flash lights up, charging is complete. ● The flash will be synchronized with the camera at a speed of 1/180 sec or less. 4 Select a flash mode. ~ "Selecting the flash mode" (P. 58) (flash mode) button 62