Panasonic KX-FLB851 Multi-function Laser Fax - Page 22

 Turning the power switch ON, 2.3 Dialing mode, Preparation

Page 22 highlights

2. Preparation 2.2 Turning the power switch ON Turn the power switch to the ON position (1). 2.3 Dialing mode If you cannot dial (page 26), change this setting depending on your telephone line service. {MENU} 1 Note: L When you operate the unit right after turning the power switch ON or after leaving the unit unused for a long period of time, the scanner lamp (2) will flash for a short while. The scanner will also move instantaneously. This is normal for the unit. After that, the scanner lamp will remain ON (the default is for approx. 15 minutes, feature #403 on page 62). 2 {SET} 1 Press {MENU}. SYSTEM SETUP PRESS [( )] 2 Press {#}, then {1}{2}{0}. DIALING MODE =TONE [V^] 3 Press {1} or {2} to select the desired setting. {1} "PULSE": For rotary pulse dial service. {2} "TONE" (default): For tone dial service. 4 Press {SET}. 5 Press {MENU} to exit. 20 For assistance, please visit http://www.panasonic.com/consumersupport

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110

2. Preparation
20
For assistance, please visit http://www.panasonic.com/consumersupport
2.2 Turning the power
switch ON
Turn the power switch to the ON position (
1
).
Note:
L
When you operate the unit right after turning
the power switch ON or after leaving the unit
unused for a long period of time, the scanner
lamp (
2
) will flash for a short while. The
scanner will also move instantaneously. This
is normal for the unit. After that, the scanner
lamp will remain ON (the default is for approx.
15 minutes, feature #403 on page 62).
2.3 Dialing mode
If you cannot dial (page 26), change this setting
depending on your telephone line service.
1
Press
{
MENU
}
.
SYSTEM SETUP
PRESS [
()
]
2
Press
{#}
, then
{
1
}{
2
}{
0
}
.
DIALING MODE
=TONE
[
V^
]
3
Press
{
1
}
or
{
2
}
to select the desired setting.
{
1
}
PULSE
: For rotary pulse dial service.
{
2
}
TONE
(default): For tone dial service.
4
Press
{
SET
}
.
5
Press
{
MENU
}
to exit.
1
2
{
SET
}
{
MENU
}