Panasonic KX-FLB851 Multi-function Laser Fax - Page 72
Error messages – Display, Display, Cause & Solution - how to clean
UPC - 037988809851
View all Panasonic KX-FLB851 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
9. Help 9.2 Error messages - Display If the unit detects a problem, one or more of the following messages will appear on the display. Display "CALL SERVICE" "CARRIAGE ERROR" "CHANGE DRUM" "CHANGE SUPPLIES" "CHECK DOCUMENT" "CHECK DRUM" "CHECK INSTALL INPUT TRAY #1" "CHECK MEMORY" "CHECK PICK UP INPUT TRAY #1" "CLOSE ADF COVER" "DIRECTORY FULL" "DRUM LIFE LOW REPLACE SOON" "FAX IN MEMORY" "KEEP COPYING" Cause & Solution L There is something wrong with the unit. Contact our service personnel. L There is something wrong with the carriage sensor. Contact our service personnel. L There is something wrong with the drum unit. Replace the drum unit and the toner cartridge (page 79). L The document was not fed into the unit properly. Re-insert the document. If misfeeding occurs frequently, clean the document feeder rollers (page 90) and try again. L The drum unit is not inserted properly. Re-insert it correctly (page 12). L The input tray is not inserted correctly. Pull the input tray out, then re-insert it. Note: L "#1": Paper input tray L "#3": Optional input tray L The memory (telephone numbers, parameters, etc.) has been erased. Re-program. L Recording paper was not fed into the unit properly. Re-insert the recording paper (page 84, 85). L The cover at the left side of the optional input tray is open. Close it. Note: L "#1": Paper input tray L "#2": Multi-purpose input tray L "#3": Optional input tray L The ADF cover is open. Close it. L There is no space to store new items in navigator directory. Erase unnecessary items (page 30). L The drum life is near to an end. Replace the drum unit as soon as possible (page 79). L The unit has a document in memory. See the other displayed message instructions to print out the document. For fax memory capacity, see page 92. L If you select the computer that will be used for receiving a fax in feature #443 (page 67), and feature #442 is set to "ALWAYS" (page 65), check the connection between the computer and the unit. L Copying has stopped due to a lack of recording paper or paper being fully stacked on the output tray. See the other displayed message instructions to continue copying. 70 For assistance, please visit http://www.panasonic.com/consumersupport