Panasonic KX-FLB851 Multi-function Laser Fax - Page 45
Copy, Copying, 6.1 Using the unit as a copy machine, 6.2 Making a copy, 1.1 Entering the copy mode
UPC - 037988809851
View all Panasonic KX-FLB851 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
6CoCpoypinyg 6.1 Using the unit as a copy machine 6.1.1 Entering the copy mode Before copying, set the operation mode to the copy mode. {COPY} Press {COPY} to turn the {COPY} light ON. Note: L You can change the default operation mode (feature #463 on page 62) and the timer before returning to the default operation mode (feature #464 on page 62). L Copied documents will be stacked on the upper output tray. You can change the output tray for copying (feature #466 on page 67). L If the {FAX AUTO ANSWER} indicator is ON, the unit can receive faxes automatically even in the copy mode. 6.2 Making a copy 6.2.1 Using the auto document feeder L Confirm that there are no documents on the scanner glass. {CONTRAST} 1 {COPY} {STOP} {PAPER TRAY} {START} {RESOLUTION} {}{V}{^} 6. Copy 1 If the {COPY} light is OFF, turn it ON by pressing {COPY}. 2 Set the original. 1. Adjust the width of the document guides (1) to fit the actual size of the document. 2. Insert the document (up to 50 pages) FACE UP into the feeder until a single beep is heard. 3 If necessary, change the following settings according to the type of document. L To select the resolution, see page 43. L To select the contrast, see page 43. L To select the input tray and paper size, see page 44. 4 If necessary, enter the number of copies (up to 99). 5 Press {START}. L The unit will start copying. 6 After you finish copying, press {STOP} to reset the settings you set in step 3. Note: L Any document which can be sent as a fax can also be copied and scanned (page 28). The effective scanning area is changed depending on the setting of the paper size. L Do not open the document cover when making a copy with the auto document feeder. To stop copying Press {STOP}. To select the resolution 1. Press {RESOLUTION}. 2. Press {V} or {^} repeatedly to select the desired resolution. - "TEXT/PHOTO": For documents containing both text and photographs. - "TEXT": For documents containing only text. - "PHOTO": For documents containing photographs, shaded drawings, etc. Note: L You can change the default resolution in feature #461 (page 66). To select the contrast You can adjust this setting depending on the lightness or darkness of the document. 5 levels (light to dark) are available. 1. Press {CONTRAST}. 43