Panasonic KX-FLB851 Multi-function Laser Fax - Page 37
Using the unit with an answering machine, 9.1 Setting up the unit and an, answering machine
UPC - 037988809851
View all Panasonic KX-FLB851 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
press {*} {#} {9} (default fax activation code) firmly. L The unit will start reception. 3. Replace the handset. Note: L To receive fax documents using the extension telephone, make sure remote fax activation is turned ON (feature #434 on page 64) beforehand. The default setting is ON. How to receive faxes with the optional handset unit 1. Lift the handset to answer the call. 2. When: - document reception is required, - a fax calling tone (slow beep) is heard, or - no sound is heard, press {START}. L The unit will start fax reception. To stop receiving Press {STOP}. 3. Fax 3.9 Using the unit with an answering machine 3.9.1 Setting up the unit and an answering machine 1 Connect the answering machine (1). L Answering machine is not included. L Remove the stopper (2). 2 1 2 Set the number of rings on the answering machine to less than 4. L This will allow the answering machine to answer the call first. 3 Record a greeting message on the answering machine. L We recommend you record a message up to 10 seconds long, and not to pause for more than 4 seconds during the message. Otherwise, both machines will not function correctly. 4 Activate the answering machine. 5 Set the unit to the desired receiving mode (page 34). L If you set to FAX ONLY mode, change the ring setting in FAX ONLY mode to "5 EXT.TAM" (feature #210 on page 61). 6 Check all or part of the following are not the same: - the remote access code of the answering machine 35