Ricoh 5510L Operating Instructions - Page 122

er seal horizontally to remove it.

Page 122 highlights

Troubleshooting B Grasp the handles at both ends and remove the toner cartridge. Important ❒ Using the cartridge without removing the seal could damage the machine. Always remove the seal before using a new cartridge. ❒ Be sure to pull the seal horizontally when removing it. Pulling it from above or below can cause toner to easily spill out. ❒ Be careful not to get toner on your hands or clothes. 4 C Shake the new toner cartridge left ❒ Once the seal is removed, toner can easily spill out, so be careful and right, and back and forth not to shake or bump it. about 7 or 8 times. E Grasp the handles at the sides of the cartridge end and push it into the machine. TKST020N Note ❒ Unevenly distributed toner within the cartridge may result in reduced print quality. D Place the toner cartridge on a flat surface. While supporting the cartridge with one hand, pull the toner seal horizontally to remove it. TKST040N F Close the main side cover making sure it clicks firmly into place. Important ❒ The front cover will not close properly if the toner cartridge is set into the machine incorrectly. If the cover will not close, remove the cartridge and set it again. 114 TKST030N

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128

Troubleshooting
114
4
B
Grasp the handles at both ends
and remove the toner cartridge.
C
Shake the new toner cartridge left
and right, and back and forth
about 7 or 8 times.
Note
Unevenly
distributed
toner
within the cartridge may result
in reduced print quality.
D
Place the toner cartridge on a flat
surface. While supporting the car-
tridge with one hand, pull the ton-
er seal horizontally to remove it.
Important
Using the cartridge without re-
moving the seal could damage
the machine. Always remove
the seal before using a new car-
tridge.
Be sure to pull the seal horizon-
tally when removing it. Pulling
it from above or below can
cause toner to easily spill out.
Be careful not to get toner on
your hands or clothes.
Once the seal is removed, toner
can easily spill out, so be careful
not to shake or bump it.
E
Grasp the handles at the sides of
the cartridge end and push it into
the machine.
F
Close the main side cover making
sure it clicks firmly into place.
Important
The front cover will not close
properly if the toner cartridge is
set into the machine incorrectly.
If the cover will not close, re-
move the cartridge and set it
again.
TKST020N
TKST030N
TKST040N