Ricoh 5510L Operating Instructions - Page 51
Extra Super Fine 24, 1 lines/mm, 600dpiWhen receiving a fax, message or copying, Optional 40MB,
View all Ricoh 5510L manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
Scan Settings ❖ Extra Super Fine (24×23.1 lines/mm, 600×600dpi)(When receiving a fax message or copying, Optional 40MB Memory Card is required.) This is suitable for originals with small characters or geometric figures like newspapers. Select when you require finer image clarity than super fine. Limitation ❒ If the other party's machine does not support the resolution at which you are sending, this machine automatically switches to a resolution which is supported. This machine can send with Standard, Detail, Super Fine and Extra Super Fine. Even if you send the original with Extra Super Fine, the other party's machine may receive it with Fine (8x15.4lines/mm, 200x400dpi) or Detail (8x7.7lines/mm, 200x200dpi). ❒ When copying or receiving with Extra Super Fine, Optional 40MB Memory Card is required. Turn the "EXTRA SUPER FINE IN COPY MODE" and "EXTRA SUPER FINE IN RECEPTION MODE" on with the User Parameters (switch 20 bit 1 and bit 3). See p.178 "User Parameters", . ❒ When sending with Extra Super Fine, turn the "EXTRA SUPER FINE IN TRANSMISSION MODE" on with the User Parameters (switch 20 bit 2). See p.178 "User Parameters", . Note ❒ This machine can receive fax messages with Standard, Detail, Super Fine, Extra Super Fine (option). ❒ You can check the resolution type with the Journal. ❒ When receiving fax messages or printing reports and lists, or copying with Extra Super Fine (option), the "Length Reduction"function cannot be used. ❒ When turning the "EXTRA SUPER FINE IN TRANSMISSION MODE" and "EXTRA SUPER FINE IN RECEPTION MODE" on with the 2 user parameters (switch 20 bit 2,3), sending or receiving faxes on mul- tiple lines is not possible. Copies and received documents cannot be printed either. ❒ To select 300x300dpi, NIC FAX Unit (Option for Type1) is required. 300x300dpi can be used with the scanner function. When sending fax messages with 300x300dpi, the machine switches to Detail automatically. ❒ You can set the resolution type after the power is turned on or the {Clear Modes / Energy Saver} key is pressed with the user parameters (switch 00 bit 5,4). See p.178 "User Parameters", . A Press the {Resolution} key to switch between resolutions. The indicators above the key show the current selection. Note ❒ When Detail and Super Fine are lit at the same time, 300x300dpi (option) is selected. 43