Ricoh 5510L Operating Instructions - Page 47
Immediate Transmission
View all Ricoh 5510L manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
Immediate Transmission Immediate Transmission D Immediate Transmission is conve- nient when: Specify the destination. • You want to send an original immediately as it is scanning. • You want to quickly check whether you have successfully connected with the other party's fax machine. • Your machine's memory is getting full. The machine dials immediately after you press the {Start} key. The message is scanned and transmitted page by page without being stored in memory. 2 If you make a mistake, press the {Clear} key or the {Stop} key, and then enter the correct number again. Reference p.46 "Dialing" See p.75 "Chain Dial", . Note ❒ You can only specify one destination for Immediate Transmission. E Press the {Start} key. ❒ When the Backup File Transmission Setting is on, immediate transmission cannot be used. See p.243 "Backup File Transmission Settings", . A Check that the Immediate Trans- mission indicator is lit. If it is not lit, press the {Transmission Mode} key. B Set your original. The machine calls the destination. While it is dialing, the number or name which is programmed as the Own Name or Own Fax Number in the machine of the other party is shown on the display. When connected, the machine starts scanning the original. Reference Reference p.31 "Setting Originals" C Select any scan settings you re- quire. See p.42 "Scan Settings". p.55 "Own Name/Fax Header/Own Fax Number" After transmission, the machine will return to the standby display. 39