Ricoh SP4100N Operating Instructions - Page 31
Attaching Memory Unit Type C 128MB/256MB (SDRAM Module
UPC - 026649027994
View all Ricoh SP4100N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
Attaching Memory Unit Type C 128MB/256MB (SDRAM Module) Attaching Memory Unit Type C 128MB/ 256MB (SDRAM Module) • Do not touch the inside of the controller board compartment. Doing so may cause a malfunction or a burn. 2 • Before touching the memory unit, ground yourself by touching something metal to discharge any static electricity. Static electricity can damage the memory unit. • Do not subject the memory unit to physical shocks. • Before using the new memory unit, Be sure to make settings in the printer driver. • Remove the default SDRAM module (64 MB) before installing the optional SDRAM module. 1. Turn off the power of the printer, and then unplug the power cable and interface cable. 2. Remove the two screws holding the controller board in place. AUB202S The removed screws are required in fastening the controller board. 3. Pull out the handle of the controller board. AUB203S 29