Ricoh SP4100N Operating Instructions - Page 56
Enable IPv4 to use the Pure IPv4 environment of NetWare 5/5.1, NetWare 6/6.5.
UPC - 026649027994
View all Ricoh SP4100N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
4. Configuration 1. Press the [Menu] key. AUB051S 4 The [Menu] screen appears. 2. Press the [ ] or [ ] key to display [Host Interface], and then press the [ Enter] key. 3. Press the [ ] or [ ] key to display [Network Setup], and then press the [ Enter] key. 4. Press the [ ] or [ ] key to display [Active Protocol], and then press the [ Enter] key. 5. Press the [ ] or [ ] key to set the network protocol, and then press the [ Enter] key. 6. Press the [ ] or [ ] key to display [Active] or [Not Active], and then press the [ Enter] key. Set other protocols you need to set in the same way. • Select [Not Active] for unused protocols. • Enable IPv4 to use the Pure IPv4 environment of NetWare 5/5.1, NetWare 6/6.5. 54
1.
Press the [Menu] key.
AUB051S
The [Menu] screen appears.
2.
Press the [
] or [
] key to display [Host Interface], and then press the [
Enter] key.
3.
Press the [
] or [
] key to display [Network Setup], and then press the [
Enter] key.
4.
Press the [
] or [
] key to display [Active Protocol], and then press the [
Enter] key.
5.
Press the [
] or [
] key to set the network protocol, and then press the [
Enter] key.
6.
Press the [
] or [
] key to display [Active] or [Not Active], and then press the [
Enter] key.
Set other protocols you need to set in the same way.
•
Select [Not Active] for unused protocols.
•
Enable IPv4 to use the Pure IPv4 environment of NetWare 5/5.1, NetWare 6/6.5.
4. Configuration
54
4