Ricoh SP4100N Operating Instructions - Page 65
Setting SSID, Enter] key. - part number
UPC - 026649027994
View all Ricoh SP4100N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
IEEE 802.11b (Wireless LAN) Configuration 9. Set [Trans. Speed] in the same way. The factory default is [Auto]. If you need to change the transmitting speed depending on environment you are using, select the appropriate transmitting speed. 10. Print a configuration page to confirm the settings made. 4 • "Printing the Test Page", Quick Installation Guide. Setting SSID If [Infrastructure] or [802.11 Ad hoc] is selected for [Comm. Mode], set SSID to use for transmission. Consult your network administrator for the SSID to use. 1. In the [IEEE 802.11b] menu, press the [ ] or [ ] key to display [SSID], and then press the [ Enter] key. If an SSID has been set, you can check the SSID setting. 2. Press the [ ] or [ ] key to display [Enter ID], and then press the [ Enter] key. 3. Press the [ ] or [ ] key to enter characters, and then press the [ Enter] key. The number of characters you have entered is displayed on the top right of the screen. The characters that can be used are ASCII 0x20-0x7e (32 bytes), 16 digits. 63