Ricoh SP4100N Operating Instructions - Page 57
To specify the IP Address, Press the, key to enter the address, and then press
UPC - 026649027994
View all Ricoh SP4100N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
Ethernet Configuration 7. Press the [Escape] key until the screen returns to the [Network Setup] menu. 8. If you use IPv4, assign the IPv4 address to the printer. Press the [ ] or [ ] key to display [IPv4 Settings], and then press the [ Enter] key. To get the IP address for the printer, contact your network administrator. 9. To specify the IP Address, Press the [ ] or [ ] key to display [IPv4 Address], and then press 4 the [ Enter] key. If you use IPv4, also assign subnet mask and gateway address. 10. Press the [ ] or [ ] key to enter the address, and then press the [ Enter] key. Press the [ ] or [ ] key to enter the left most entry field of the address. After entering the left field, press the [ Enter] key, and then you can enter the next field. After completing to enter in the all fields, press the [ Enter] key. Do not set "011.022.033.044" as the IP address. 11. If you use IPv4, use this method of assigning IPv4 address to assign subnet mask and gateway address. Press the [ ] or [ ] key to select [Subnet mask] or [Gateway Address], and then press the [ Enter] key. 12. Press the [Online] key. The initial screen appears. 13. Print a configuration page to confirm the settings made. • "Printing the Test Page", Quick Installation Guide. 55