Ricoh SP4100N Operating Instructions - Page 35
Attaching IEEE 802.11b Interface Unit
UPC - 026649027994
View all Ricoh SP4100N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
Attaching IEEE 802.11b Interface Unit Attaching IEEE 802.11b Interface Unit • Do not touch the inside of the controller board compartment. Doing so may cause a machine malfunction or a burn. 2 • Before handling the IEEE 802.11b interface board, ground yourself by touching something metal to discharge any static electricity. Static electricity can damage the IEEE 802.11b Interface board. • Do not subject the 802.11b interface unit to physical shocks. 1. Check the package contains the following: IEEE 802.11b Interface Unit AUB247S 1. Interface Unit 2. Card 3. Antenna 4. Antenna Cap 2. Turn off the power of the printer, and then unplug the power cable and the interface cable. 33
Attaching IEEE 802.11b Interface Unit
•
Do not touch the inside of the controller board compartment. Doing so may cause a machine
malfunction or a burn.
•
Before handling the IEEE 802.11b interface board, ground yourself by touching something metal to
discharge any static electricity. Static electricity can damage the IEEE 802.11b Interface board.
•
Do not subject the 802.11b interface unit to physical shocks.
1.
Check the package contains the following:
IEEE 802.11b Interface Unit
AUB247S
1.
Interface Unit
2. Card
3. Antenna
4.
Antenna Cap
2.
Turn off the power of the printer, and then unplug the power cable and the interface cable.
Attaching IEEE 802.11b Interface Unit
33
2