Sharp UP-820N UP-820N Operation Manual - Page 123

13 Programming This chapter explains how to program various items. Before you start programming, select the PGM1, PGM2 or SD CARD mode from the mode selection screen depending on the item you are going to program. Basic Procedure PGM1 MODE PGM2 MODE SD CARD MODE This section illustrates the basic programming by using an example of programming for departments. Programming screens Opening screen: When you select the PGM1, PGM2 or SD CARD mode from the mode selection screen, your display will show a programming opening screen corresponding to the mode you selected. (In case of PGM2) Programming menu: Use the cursor keys or numeric keys to select the desired option and press the (ENTER) key, or touch the option on the screen. Mode you are in Numeric key area Common status area Numeric key data area Code selecting screen (Dept. PLU/UPC, Customer): Code title Programming screen: Code number and its description: (In case of PLU/UPC and customer, two lines are used for one code, upper line - code, lower line - description.) Use the cursor keys or numeric keys to select the desired option and press the (ENTER) key, or touch the option on the screen. (When you select the last item, the screen goes to the selected option screen without pressing the (ENTER) key.) Selected menu message Setting items: Use the cursor to select the desired option or touch it on the screen. There are three entry methods described below: Numeric entry : Use numeric keys. Character entry : Use character keys. Selective entry : Press the key to toggle options and press the (ENTER) key to select it, or press the SBTL key to show the options list. Use the cursor keys to move the cursor and press the (ENTER) key to select it, or touch the option on the screen. - 121 -