Sharp UP-820N UP-820N Operation Manual - Page 236
Key Data Entry Job Table Programming
View all Sharp UP-820N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 236 highlights
Key Data Entry Job Table Programming Use the following procedure for key data entry job table programming: Capture job number You can program a max. of 99 capture job numbers. Procedure Program each item as follows: • CAPTURE JOB# (Use the selective entry method) Select the pertinent capture Job number. (1 to 99) • MESSAGE#1 Thru 4 (Use the character entry method) Description for the job (display message). Up to 12 characters can be entered. (for MESSAGE#1 Thru 4) • ENTRY#1 thru 4 (Use the selective entry method) Data entry type NUMERIC:Numeric data type CHARACTER: Character data type INHIBIT: Data entry is inhibited. • MAX. LENGTH#1 thru 4 (Use the numeric entry method) Max. length of data entry (0 to 13) "0" means that ENTER key entry is only allowed. • MIN. LENGTH#1 thru 4 (Use the numeric entry method) Min. length of data entry (0 to 13) Select a pertinent ENTER macro key. • TEXT PRINT#1 thru 4 (Use the selective entry method) YES : Prints entry data on R/J or Bill printer. NO : Does not print entry data. NOTE • If the (DEL) key is pressed on the job number selection menu, the selected job table will be deleted. The screen continues. - 234 -