Sharp UP-820N UP-820N Operation Manual - Page 130

PLU/UPC (continued) • ENTRY TYPE (Use the selective entry method) Mode parameter PRESET : Preset price only OPEN & PRESET : Open price and preset price INHIBIT : Inhibited OPEN : Open price only NOTE For UPC, it is fixed to PRESET . • BASE QTY (Use the numeric entry method) Base quantity for each PLU/UPC which is counted each time the item is entered. (max. 2 digits) • MINIMUM STOCK (Use the numeric entry method) Minimum stock quantity for a PLU (max. 7 digits) • PRICE SHIFT (Use the selective entry method) ENABLE : Enables PLU/UPC price level shift. INHIBIT : Inhibits PLU/UPC price level shift. COMPULSORY : Makes PLU/UPC price level shift compulsory. NOTE When COMPULSORY is selected for a PLU/UPC, repeat entries of the PLU/UPC are inhibited. • *ZERO OF P1 thru 6 (Use the selective entry method) ALLOWED : Allows a zero-price entry. INHIBIT : Inhibits a zero-price entry. • COUPON OBJECT (Use the numeric entry method) Select an object PLU code (max. 5 digits). A coupon-like PLU is able to link to another PLU (object PLU). By this programming, the associated coupon PLU cannot be entered unless the object PLU has been rung up. (However, the quantity is not affected.) NOTE • Any object PLU should not be programmed as a minus PLU or belong to any minus department. • MENU TYPE (Use the selective entry method) PLU menu type selection NORMAL : Normal PLU/UPC LINK : Link PLU/UPC • LINK TBL# (Use the numeric entry method) Table number for link PLUs (1 thru 99) • MIX&MATCH TBL# (Use the numeric entry method) Table number for mix and match (1 thru 99) • CONDIMENT TBL# (Use the numeric entry method) Table number for condiment entry (1 thru 99) NOTE For UPC, it is fixed to "00". - 128 -