Singer SE340 LEGACY Instruction Manual and Troubleshooting Guide - Page 15
Twin Needle
View all Singer SE340 LEGACY manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
SETTING UP THE MACHINE SEWING PREPARATION 8SSHU7KUHDG7HQVLRQ7RR/RRVH Upper thread will appear on the bottom side of the fabric. Increase upper thread tension. TWIN NEEDLE Activate the twin needle program by pressing - or + buttons to set the twin needle width. When a twin needle width is selected, the width of all stitches is limited to prevent needle breakage. To deactivate, press - button until number of twin needle width will disappear. 7KUHDG7HQVLRQIRU'HFRUDWLYH6WLWFKLQJ Thread tension should be set to a slightly looser tension than that for straight stitch. The upper thread should appear slightly on the bottom side of your fabric, for example, when doing decorative sewing. In sewing mode, the Twin Needle icon will be shown. The setting is kept until you deactivate it. 6HHSDJHIRUPRUHLQIRUPDWLRQDERXWWZLQQHHGOHVHZLQJ +HOSIXO+LQWV ,I\RXUVHZLQJDSSHDUVDVVKRZQLQWKHLOOXVWUDWLRQVWLWFKHV on the top side of the fabric are good, but the bottom side ORRNVYHU\ORRS\ LWLVPRVWOLNHO\WKDWWKHXSSHUWKUHDG is not threaded correctly. Refer to page 19 for correct threading. 2. If after checking the top thread and the bobbin thread is still showing on the top side, check the bobbin to see if it is set correctly. Refer to page 18 for information on correct bobbin setting. 323830(66$*(6$%2877:,11(('/( This pop-up message will appear when Twin Needle program is activated. &KHFNWKHQHHGOHDQGSUHVVWKH³✓" button to continue. This message will appear when a stitch that cannot be used with twin needle, is selected. 3UHVVWKHWKH³✓" button and select another pattern or reset the twin needle program. This message will appear when stitch width is adjusted to the limit. 3UHVVWKHWKH³✓" button to continue. 15