Home » TP-Link Manuals » Bridges & Routers » TP-Link TD-W8950ND » Manual Viewer

TP-Link TD-W8950ND User Guide - Page 88

Type the Router's LAN IP address the default IP is 192.168.1.1 into the Default gateway

UPC - 845973060404

Add to My Manuals
Save this manual to your list of manuals

Page 88 highlights

TD-W8950ND 150Mbps Wireless Lite N ADSL2+ Modem Router User Guide Figure 0-3 ) Note: For Windows 98 OS or before, the PC and Router may need to be restarted. ¾ Setting IP address manually 1 Select Use the following IP address radio button. And the following items available. 2 If the Router's LAN IP address is 192.168.1.1, specify the IP address as 192.168.1.x (x is from 2 to 254), and the Subnet mask as 255.255.255.0. 3 Type the Router's LAN IP address (the default IP is 192.168.1.1) into the Default gateway field. 4 Select Use the following DNS server addresses. In the Preferred DNS Server field you can enter the same value as the Default gateway or type the local DNS server IP address. 81

Section	Page
Package Contents	8
Chapter 1. Product Overview	9
1.1 Overview of the Router	9
1.2 Main Features	10
1.3 Panel Layout	11
1.3.1 The Front Panel	11
1.3.2 The Back Panel	12
Chapter 2. Connecting the Router	13
2.1 System Requirements	13
2.2 Installation Environment Requirements	13
2.3 Connecting the Router	13
Chapter 3. Quick Installation Guide	15
3.1 TCP/IP Configuration	15
3.2 Quick Installation Guide	16
Chapter 4. Configuring the Router	21
4.1 Login	21
4.2 Device Info	21
4.3 Quick Setup	22
4.4 QSS	22
4.5 Advanced Setup	28
4.5.1 WAN	29
4.5.2 LAN	39
4.5.3 MAC Clone	42
4.5.4 NAT	43
4.5.4.1 Virtual Servers	43
4.5.4.2 Port Triggering	45
4.5.4.3 DMZ Host	46
4.5.5 Security	47
4.5.5.1 MAC Filtering	47
4.5.5.2 IP Filtering	48
4.5.5.3 URL Filtering	51
4.5.5.4 Application Filter	52
4.5.5.5 Parental Control	53
4.5.6 Quality of Service	54
4.5.6.1 Queue Config	55
4.5.6.2 QoS Classification	55
4.5.7 Routing	56
4.5.7.1 Default Gateway	57
4.5.7.2 Static Route	57
4.5.8 DNS	58
4.5.8.1 DNS Server	58
4.5.8.2 Dynamic DNS	59
4.5.9 DSL	60
4.5.10 Port Mapping	61
4.5.11 IPSec	62
4.6 Wireless	66
4.6.1 Basic	66
4.6.2 Security	68
4.6.3 MAC Filtering	71
4.6.4 Advanced	73
4.6.5 Statistics	74
4.7 Diagnostics	75
4.8 Management	76
4.8.1 Settings	76
4.8.1.1 Backup	77
4.8.1.2 Update	77
4.8.1.3 Restore Default	77
4.8.2 System Log	77
4.8.3 SNMP Agent	79
4.8.4 TR-069 Client	79
4.8.5 Internet Time	80
4.8.6 Access Control	81
4.8.6.1 Service	81
4.8.6.2 IP Address	82
4.8.6.3 Password	82
4.8.7 Update Software	83
4.8.8 Reboot	84
Appendix A: FAQ	85
Appendix B: Configuring the PC	86
Appendix C: Specifications	90

Match case Limit results 1 per page

TD-W8950ND

150Mbps Wireless Lite N ADSL2+ Modem Router User Guide

Figure 0-3

)

Note:

For Windows 98 OS or before, the PC and Router may need to be restarted.

Setting IP address manually

Select Use the following IP address radio button. And the following items available.

If the Router's LAN IP address is 192.168.1.1, specify the IP address as 192.168.1.x (x is

from 2 to 254), and the Subnet mask as 255.255.255.0.

Type the Router’s LAN IP address (the default IP is 192.168.1.1) into the Default gateway

field.

Select Use the following DNS server addresses. In the Preferred DNS Server field you can

enter the same value as the Default gateway or type the local DNS server IP address.