Yamaha 01V Owner's Manual - Page 103
Prefader/Postfader Aux Sends
View all Yamaha 01V manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 103 highlights
Pre-fader/Post-fader Aux Sends 97 Pre-fader/Post-fader Aux Sends The aux sends on input channels 1 through 24 and the effects returns can be configured individually as pre-fader or post-fader sends. Pre-fader means that signals are sourced before, and are not affected by the regular channel fader. Post-fader means that signals are sourced after, and are affected by the regular channel fader. With a post-fader send, the regular channel fader can be used to control the channel level and the aux send level simultaneously. For Input Channels 1-16 & the Effects Returns 1. Use the [AUX] buttons to locate an AUX PRE/POST page, as shown below. The value below each PRE/POST switch indicates the position of the aux send fader. The position of the corresponding aux send master fader is displayed at the top of the page. 2. Use the [SEL] buttons or cursor buttons to select the PRE/POST switches, and the [ENTER] button, PARAMETER wheel, or [-1/DEC] and [+1/INC] buttons to set them. The PRE/POST switches on input channels 13 and 14 (likewise 15 and 16) are permanently linked. When input channels 1 through 12 are paired, or when aux sends are configured as stereo pairs ("Pairing Input Channels" on page 52), their PRE/POST switches are linked. For Input Channels 17-24 1. Use the [OPTION I/O] button to locate OPTION page 2, as shown below. 2. Use [SEL] buttons 17 through 24 to select channels. 3. Use the cursor buttons to select the AUX PRE/POST switches, and the PARAMETER wheel or [-1/DEC] and [+1/INC] buttons to set them. When aux 1 and 2 are paired ("Pairing Aux Sends" on page 101), the PRE/POST switches are linked. 01V-Owner's Manual