Yamaha 01V Owner's Manual - Page 143
GATE REVERB, REVERSE GATE, MONO DELAY, Early reflections with gate
View all Yamaha 01V manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 143 highlights
Effects Parameters 139 GATE REVERB, REVERSE GATE Early reflections with gate, and early reflections with reverse gate. Parameter Range Description TYPE ROOMSIZE LIVENESS INI.DLY DIFF. DENSITY HI.RATIO ER NUM. FB GAIN HPF LPF Type-A, Type-B 0.1-20.0 0-10 0.0-500.0 ms 0-10 0-100% 0.1-1.0 1-19 -99 to +99% Thru, 21 Hz-8.0 kHz 50 Hz-16.0 kHz, Thru Type of early reflection simulation Reflection spacing Early reflections decay characteristics (0 = dead, 10 = live) Initial delay before reverb begins Reverb diffusion (left-right reverb spread) Reverb density High-frequency feedback ratio Number of early reflections Feedback gain High-pass filter cutoff frequency Low-pass filter cutoff frequency MONO DELAY Basic repeat delay. Parameter Range Description DELAY NOTE 0.0-2730.0 ms *1 Delay time Used in conjunction with TEMPO to determine DELAY FB.GAIN HI.RATIO HPF LPF TEMPO*2 -99 to +99% Feedback gain (plus values for normal-phase feedback, minus values for reverse-phase feedback) 0.1-1.0 High-frequency feedback ratio Thru, 21 Hz-8.0 kHz High-pass filter cutoff frequency 50 Hz-16.0 kHz, Thru Low-pass filter cutoff frequency 25-300 bps Used in conjunction with NOTE to determine DELAY 1. (Maximum value depends on the tempo setting) 2. For more information about the DELAY, NOTE, and TEMPO parameters, see "Setting Delay, Freq, Note & Tempo Parameters" on page 137. 01V-Owner's Manual