Yamaha 01V Owner's Manual - Page 30
Rear Panel, AMONITOR OUT BPHANTOM +48V ON-OFF Switches COMNI OUTs
View all Yamaha 01V manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
22 Chapter 3-Touring the 01V Rear Panel 12 3 4 52 6 7 8 CH 7-12 ON OFF MONITOR OUT +4dB (BAL) R L 4 PHANTOM +48V OMNI OUT +4dB (BAL) 3 2 1 STEREO OUT R +4dB (BAL) L CH 1-6 ON OFF DIGITAL STEREO MIDI COAXIAL OUT IN THRU OUT IN TO HOST POWER ON/ OFF OPTION I/O 9 J A MONITOR OUT These are balanced 1/4-inch phone jacks with a +4 dB nominal output level. Balanced or unbalanced phone plugs can be connected. They output the monitor signals and should be connected to the inputs on a monitor amplifier. The monitor signal source is set using the MONITOR-2TR IN switch and SETUP page 2, and the output level is set using the MONITOR LEVEL control. 1/4" TRS phone plug Tip (hot) Ring (cold) Sleeve (ground) B PHANTOM +48V ON-OFF Switches The CH 1-6 and CH 7-12 PHANTOM +48V ON-OFF switches are used to turn on and off the +48 V phantom power for XLR inputs 1 through 6 and 7 through 12, respectively. C OMNI OUTs These are balanced 1/4-inch phone jacks with a +4 dB nominal output level. Balanced or unbalanced phone plugs can be connected. These outputs can be configured individually as analog bus outs, aux sends, stereo outs, or direct outs for input channels 1 through 16. Bus outputs are typically connected to multitrack recorders, while aux sends are typically used to feed external effects processors, foldback amplifiers, and so on. 1/4" TRS phone plug Tip (hot) Ring (cold) Sleeve (ground) 01V-Owner's Manual