Yamaha 01V Owner's Manual - Page 40

Fader Modes 33 Option I/O or Remote is selected, it's not necessary to press the [HOME] button.) To select the EQ function for input channel 20, press the [OPTION I/O] button, and then press [SEL] button 20 (CH20 appears on the display). Use the F and G controls to adjust the EQ. Master [SEL] Button Examples To select the stereo output, press the [HOME] button, and then press the MASTER [SEL] button (ST appears in the bottom right corner of the display). To select the AUX 1 master, press the [AUX 1] button, and then press the MASTER [SEL] button (AUX1 appears on the display). To select the EFFECT 1 master, press the [EFFECT 1] button, and then press the MASTER [SEL] button (EFF1 appears on the display). Solo Buttons The [SOLO] buttons are used to solo channels for monitoring. See "Solo Setup" on page 80 for more information. The following channels can be soloed: • CH1 through CH24-Input channels 1 through 24 • RTN1, RTN2-Effects returns 1 and 2 Fader Mode HOME AUX 1 AUX 2 AUX 3 AUX 4 EFFECT 1 EFFECT 2 OPTION I/O REMOTE 1 REMOTE 2 REMOTE 3 1-8 [17-24] SOLO button 9-12 13/14 15/16 RETURN 1/2 CH 1-16 solo RETURN 1/2 solo CH 17-24 solo - - - - - User defined MIDI controller - The [SOLO] buttons 1 through 16 can be used as MIDI controllers on REMOTE page 3. See "User Defined MIDI Controllers" on page 238 for more information. Usage Examples To solo input channel 3, press the [HOME] button, and then press [SOLO] button 3. (If a fader mode other than Option I/O or Remote is selected, it's not necessary to press the [HOME] button.) To solo input channels 13/14, press the [HOME] button, and then press [SOLO] button 13/14. (If a fader mode other than Option I/O or Remote is selected, it's not necessary to press the [HOME] button.) To solo input channel 20, press the [OPTION I/O] button, and then press [SOLO] button 20. 01V-Owner's Manual