Yamaha 01V Owner's Manual - Page 116
Pairing Bus Outs, Making Bus Out Pairs
View all Yamaha 01V manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 116 highlights
Pairing Bus Outs 111 Pairing Bus Outs Bus outs 1 and 2 and bus outs 3 and 4 can be paired together for stereo signal processing. When paired, the master faders and ON buttons are linked for simultaneous control. Making Bus Out Pairs 1. Use the [SETUP] button to locate SETUP page 4, as shown below. 2. Use the cursor buttons to select bus pair 1/2 or 3/4, and then press the [ENTER] button. The following dialog box appears. BUS 1 -> 2-Copy the settings of bus out 1 to bus out 2. BUS 2 -> 1-Copy the settings of bus out 2 to bus out 1. RESET BOTH-Reset both bus outs to their initial settings. 3. Use the cursor buttons to select a pairing mode, and then press the [ENTER] button. The highlighted switch and STEREO label show that the bus outs are now configured as a stereo pair. Releasing Bus Out Pairs 1. On SETUP page 4, use the cursor buttons to select the paired bus switch, and then press the [ENTER] button. The following dialog box appears. 2. Select OK, and then press the [ENTER] button. The stereo pair is broken, and both bus outs operate independently. 01V-Owner's Manual