Yamaha 01V Owner's Manual - Page 120
About the Omni Outs, Omni Outs, Assigning Omni Outs
View all Yamaha 01V manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 120 highlights
116 Chapter 11-Omni Outs About the Omni Outs The 01V's four omni outs can be used as aux send outputs, bus out outputs, additional stereo outputs, or post-fader direct outputs for input channels 1 through 16. Each omni out features a variable output delay of up to 300 milliseconds. Omni Outs Omni out signals are converted to analog using 18-bit D/A converters, and then output OMNI OUT +4dB (BAL) via balanced 1/4-inch phone jacks with a +4 dB nominal output level. 4 3 2 1 Assigning Omni Outs Omni outs are initially assigned to aux sends 1 through 4. They can also be assigned to the bus outs, the left and right channels of the stereo output, or post-fader direct outputs of input channels 1 through 16. 1. Use the [PAN/ROUTING] button to locate PAN/ROUT page 4, a shown below. 2. Use the cursor buttons to select the OMNI OUT parameter boxes, and the PARAMETER wheel or [-1/DEC] and [+1/INC] buttons to select sources for the omni outs. 3. Press the [ENTER] button to confirm your selection. 01V-Owner's Manual