Yamaha 01V Owner's Manual - Page 234

232 Chapter 17-MIDI Bulk Dump 01V scene memories, library programs, and setup data can be transferred to another MIDI device using System Exclusive Bulk Dump. This can be used to back up important 01V data to a MIDI data filer or controlling computer, or to exchange data between 01Vs. The 01V can transmit MIDI System Exclusive Bulk Dump messages at anytime. In order for the 01V to respond to Bulk Dump requests from other MIDI devices, the BULK Rx switch on MIDI page 1 must be turned on. See "MIDI Setup" on page 224 for more information. 1. Use the [MIDI] button to locate MIDI page 4, as shown below. 2. Use the cursor buttons to select a CATEGORY switch, and press the [ENTER] button to select it. The switch of the selected category appears highlighted. 3. For the SCENE MEM., LIBRARY, and REMOTE categories, use the cursor buttons, PARAMETER wheel, and [-1/DEC] and [+1/INC] buttons to set the TYPE, FROM, and TO parameters. Data Type ALL SETUP MEM. PGM. TABLE CTL. TABLE SCENE MEM. LIBRARY REMOTE Type - - - - - EQ DYNA EFF INTP MMC UDEF Range - - - - EDIT, 1-99 41-80 41-80 43-99 Banks 1-4 ALL (locate points 1-6) Banks 1-4 Description All the following data 01V setup data (all current settings) MIDI page 2 settings (scene memory to Program Change assignment table) MIDI page 3 settings (parameter to Control Change assignment table) Scene memories (EDIT is the Edit Buffer) EQ library user programs Dynamics library user programs Effects library user programs REMOTE page 1 banks REMOTE page 2 locate points REMOTE page 3 banks 4. Use the cursor buttons to select the REQUEST or TRANSMIT switch, and then press the [ENTER] button. When REQUEST is used, the 01V transmits a MIDI Bulk Dump request message. The receiving device then transmits the requested Bulk Dump data to the 01V. When TRANSMIT is used, the 01V transmits the selected data category via Bulk Dump. 01V-Owner's Manual