Yamaha 01V Owner's Manual - Page 257
DIGITAL IN Sync Error message, Cannot receive MIDI Bulk Dump
View all Yamaha 01V manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 257 highlights
256 Troubleshooting Symptom Fader movements are inconsistent. DIGITAL IN Sync Error message appears. UNLOCK appears in the Fs window of SETUP page 1. Cannot transmit or receive MIDI messages. MIDI Program Change messages don't recall mix scenes. MIDI Control Change messages don't control mix parameters. Cannot receive MIDI Bulk Dump data. Controls have no effect on the 01V. MMC commands have no effect. Advice Try calibrating the faders. See "Calibrating the Faders" on page 204 for more information. This warning message appears if digital signals from the Digital Stereo Coaxial In or Option I/O inputs are not wordclock synchronized with the 01V. Make sure that all digital equipment is wordclock synchronized to a common wordclock source. See "Setting the Wordclock" on page 209 for more information. Make sure the external wordclock source is turned on and that the cable carrying the wordclock signal has not been disconnected. See "Setting the Wordclock" on page 209 for more information. On MIDI page 1, check the following settings: PORT, Tx CH, Rx CH, and the Tx and Rx switches for Program Change, Control Change, etc. See "MIDI Setup" on page 224 for more information. Make sure that the 01V is configured to receive Program Change messages and that the MIDI Channels of the 01V and transmitting device match. See "MIDI Setup" on page 224 for more information. Perhaps the Program Change being transmitted is not assigned to an 01V scene memory? Check the mix scene to Program Change assignment table. See "Program Change Scene Recall" on page 227 for more information. If the scene memory assigned to the received Program Change contains no data, it cannot be recalled. Make sure that the 01V is configured to receive Control Change messages and that the MIDI Channels of the 01V and transmitting device match. See "MIDI Setup" on page 224 for more information. Perhaps the Control Change being transmitted is not assigned to an 01V parameter? Check the parameter to Control Change assignment table. See "Control Change Parameter Control" on page 229 for more information. Make sure that the BULK Rx switch on MIDI page 1 is turned on. See "MIDI Setup" on page 224 for more information. Perhaps the Local Control function on MIDI page 5 is turned off? See "Local Control" on page 234 for more information. Make sure the device number matches that of the MMC-compatible recorder. See "MIDI Machine Control" on page 236 for more information. 01V-Owner's Manual