Yamaha 01V Owner's Manual - Page 61
Grouping Faders, Making Fader Groups, Enabling & Disabling Fader Groups
View all Yamaha 01V manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
Grouping Faders 55 Grouping Faders Input channel faders 1 through 16 can be grouped together in fader groups for multi-channel control using a single fader. Three groups are available: A, B, and C. Making Fader Groups 1. Use the [SETUP] button to locate SETUP page 3, as shown below. 2. Use the up and down cursor buttons to select the fader groups, and the [SEL] buttons to add and remove faders to and from that group. Channels cannot be in more than one group at a time. Input channels 13/14, 15/16, and paired input channels 1 through 12 ("Pairing Input Channels" on page 52) are added and removed together. Operate only one fader in a group at a time. If you attempt to adjust two or more faders in the same group, the fader motors may malfunction due to the increased load. Enabling & Disabling Fader Groups Fader groups can be enabled and disabled using the ENABLE switches. Disabling a group allows you to adjust faders without removing them from the group. 1. Use the up and down cursor buttons to select the fader group that you want to disable: A, B, or C. 2. Use the [ENTER] button, PARAMETER wheel, or [-1/DEC] and [+1/INC] buttons to enable or disable the selected group. Fader group enabled Fader group disabled 01V-Owner's Manual