Yamaha 01V Owner's Manual - Page 238
MIDI Machine Control, Use [ON] buttons 1 through 6 to transmit the following transport com
View all Yamaha 01V manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 238 highlights
236 Chapter 17-MIDI MIDI Machine Control Using MIDI Machine Control (MMC) commands, an MMC-compatible recorder can be controlled from the 01V. [ON] buttons 1 through 6 can be used to control transport functions, while [SEL] buttons 1 through 6 can be used to locate six definable locate points. MMC commands are transmitted via MIDI. 1. Use the [REMOTE] button to locate REMOTE page 2, as shown below. While this page is displayed, controls other than [ON] buttons 1 through 6 and [SEL] buttons 1 through 6 are disabled. 2. Use the cursor buttons to select the DEVICE No. parameter, and the PARAMETER wheel or [-1/DEC] and [+1/INC] buttons to select a device number. The device number, which can be set from 1 through 127 or ALL, should be set to match that of the recorder you want to control. When set to ALL, all MMC-compatible recorders connected can be controlled together. 3. Use [ON] buttons 1 through 6 to transmit the following transport commands to a recorder. On Button Function MMC Command Value 1 Rewind 05 2 Fast Forward 04 3 Stop 01 4 Play 02 5 Pause 09 6 Record 06 4. Use the cursor buttons and PARAMETER wheel or [-1/DEC] and [+1/INC] buttons to set the locate times in hours, minutes, seconds, and frames. 5. Use [SEL] buttons 1 through 6 to transmit the locate commands to the recorder. Locate points can be stored using MIDI Bulk Dump. See "Bulk Dump" on page 232 for more information. 01V-Owner's Manual