Yamaha 01V Owner's Manual - Page 28
Inputs & Outputs, Top Panel - tips
View all Yamaha 01V manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
20 Chapter 3-Touring the 01V Inputs & Outputs Input and output connectors are located on the top and rear panels. Top Panel PHANTOM +48V OFF ON INPUT (BAL) 1 PHANTOM +48V OFF ON 13 14 15 -10dBV (UNBAL) L R 16 IN OUT 2TR PHONES 2 34 5 A INPUT (BAL) 1-12 Input channels 1 through 12 feature balanced XLR-3-31-type and balanced phone jack connectors, both with a nominal input range of -60 dB to +10 dB. Phantom powering (+48 V) is supplied to the XLR connectors, with master on/off switches for connectors 1 through 6 and 7 through 12. Phone jacks, which can also be used with unbalanced phone plugs, have priority over the XLR-type connectors, so when a phone plug is inserted, the XLR-type connector is disconnected. With their high sensitivity and 26 dB PAD switches, these inputs can handle a wide range of signals, from condenser microphones to "hot" line levels. Male XLR plug 1 (ground) 3 (cold) 1/4" TRS phone plug Tip (hot) Ring (cold) 2 (hot) B INPUT (BAL) 13-16 Input channels 13 through 16 feature balanced phone jack connectors, with a nominal input range of -20 dB to +10 dB. These inputs are designed for use with line-level sources, and can also be used with unbalanced phone plugs. The stereo outputs of an external effects processor or other stereo device can be connected here. Sleeve (ground) 1/4" TRS phone plug Tip (hot) Ring (cold) Sleeve (ground) 01V-Owner's Manual