Yamaha 01V Owner's Manual - Page 37
Display Elements, Switches, Rotary Controls, Parameter Boxes, Faders
View all Yamaha 01V manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
30 Chapter 4-Getting Around the User Interface Display Elements This section explains the various control elements that appear on display pages. Switches Switches appear as boxes with a shadowed outline (i.e., a thicker outline on the right side and bottom). Simple on/off-type switches are highlighted when they are turned on. In this example, the [ST] switch is on. The labels inside some switches change when they turned on and off, as these phase switches show. For option-type switches, only one switch can be on at a time. In this example, the monitor source can be set to either stereo out or ST CASCADE IN, but not both. To operate a switch, use the cursor buttons to select it, and the [ENTER] button or [-1/DEC] and [+1/INC] buttons to turn it on or off. Rotary Controls Some parameters appear as rotary controls, as this example from the PANPOT page shows. To adjust a rotary control, use the cursor buttons to select it and use the PARAMETER wheel or [-1/DEC] and [+1/INC] buttons to adjust it. Parameter Boxes Some parameters appear in parameter boxes (i.e., dotted-line boxes), as this example from the EFFECT1 EDIT page shows. To adjust a parameter box parameter, use the cursor buttons to select it, and the PARAMETER wheel or [-1/DEC] and [+1/INC] buttons to set it. Parameter boxes that require you to confirm new settings flash until you press the [ENTER] button. Faders Pages such as VIEW and BUS MASTER display faders graphically. To adjust a fader, use the cursor buttons to select it, and the PARAMETER wheel or [-1/DEC] and [+1/INC] buttons to set it. Fader knobs appear highlighted when set to the nominal position. Nominal 01V-Owner's Manual