Yamaha 01V Owner's Manual - Page 90
Main Stereo Meters, Peak Hold, Omni Outs, Stereo Output
View all Yamaha 01V manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 90 highlights
84 Chapter 7-Solo, Monitors & Meters Omni Outs HOME page 3 displays signal level meters for the four omni outs. The source assigned to an omni out is displayed below its meters. These assignments are made on PAN/ROUT page 4. See "Assigning Omni Outs" on page 116 for more information. Stereo Output HOME page 4 displays signal level meters for the stereo output. Compared to the main stereo meters, these have a large scale from -72 dB to CLIP. Meters for the stereo output also appear on the VIEW pages. See "Viewing Stereo Output Settings" on page 89 for more information. Main Stereo Meters L STEREO R CLIP -3 -6 -9 -12 -15 -18 -24 -30 -36 -42 -48 In addition to the meters on HOME page 4, stereo output levels are displayed on the dedicated 12-segment main stereo meters, with Peak Hold. The meters range from -48 dB to CLIP. If a CLIP LED does light, reduce the stereo output level to prevent signal distortion. The main stereo meters are not affected by the metering points on HOME page 5. Peak Hold The Peak Hold function works with the HOME, OPTION I/O, and main stereo meters. When it's turned on, the meter segments lit by the loudest signal peaks remain on, providing an easy way to check for peak levels. 1. Use the PARAMETER wheel, [-1/DEC] and [+1/INC] buttons, or [ENTER] button to turn the Peak Hold function on or off. To reset the Peak Hold function, turn it off and then on again. 01V-Owner's Manual