Yamaha 01V Owner's Manual - Page 167
Using the Dynamics Processors, For Input Channels 1-16, For Aux Sends 1-4
View all Yamaha 01V manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 167 highlights
164 Chapter 13-Dynamics Processors Using the Dynamics Processors Input channels 1 through 16, the aux sends, and the stereo output all feature dynamics processors. To recall a program from the dynamics library, see "Recalling Dynamics Programs" on page 175. To edit a dynamics processor, see"Editing the Dynamics Processors" on page 166. For Input Channels 1-16 1. Use [SEL] buttons 1 through 16 to select channels. 2. Use the [DYNAMICS] button to locate DYNAMICS page 1, as shown below. 3. Press the [ENTER] button to turn on the dynamics processor. The ON/OFF switch appears highlighted when the dynamics processor is on. While DYNAMICS page 1 is displayed, the [ENTER] button turns the dynamics processor on or off regardless of the cursor position. 4. Use the cursor buttons to select the parameters, and the PARAMETER wheel or [-1/DEC] and [+1/INC] buttons to set them. The dynamics processors on input channels 13 and 14 (likewise 15 and 16) are permanently linked. When input channels 1 through 12 are paired ("Pairing Input Channels" on page 52), their dynamics processors are linked, so adjustments can be made with either channel selected. For Aux Sends 1-4 1. Use the [AUX] buttons to select an aux send, and then press the MASTER [SEL] button. AUX appears on the display, indicating that an aux send is selected. 2. Use the [DYNAMICS] button to locate DYNAMICS page 1, as shown below. 3. Press the [ENTER] button to turn on the dynamics processor. The ON/OFF switch appears highlighted when the dynamics processor is on. While DYNAMICS page 1 is displayed, the [ENTER] button turns the dynamics processor on or off regardless of the cursor position. 01V-Owner's Manual