Yamaha 01V Owner's Manual - Page 48
Changing the Input Phase
View all Yamaha 01V manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
42 Chapter 5-Input Channels Changing the Input Phase The Phase switches, available on input channels 1 through 16, reverse the phase of input signals by 180 degrees. This can be used to compensate for incorrectly wired balanced cables and microphones. Also, when a snare drum is miked top and bottom, the channel connected to the bottom microphone can be phase reversed to prevent signal cancellation. 1. Use the [∅/DELAY] button to locate DELAY page 1, as shown below. 2. Use [SEL] buttons 1 through 16 to select channels. Phase switches can also be selected using the cursor buttons. 3. Use the [ENTER] button, or the [-1/DEC] and [+1/INC] buttons to set the phase of the selected channel to normal or reversed. Normal phase Reversed phase The Phase switches on input channels 13 and 14 (likewise 15 and 16) are not linked, and can be set independently. When input channels 1 through 12 are paired ("Pairing Input Channels" on page 52), their Phase switches continue to work independently. Input channels 17 through 24 do not have Phase switches. 01V-Owner's Manual