Yamaha 01V Owner's Manual - Page 256

Troubleshooting 255 Symptom Advice Added channels to a mute group but group muting does not work. Make sure that the mute group is enabled. See "Grouping Mutes" on page 56 for more information. Cannot store an EQ program. Cannot recall EQ programs to input channels 17 through 24. EQ settings cannot be stored to preset programs 1 through 40. Try storing to user programs 41 through 80. See "Storing EQ Programs" on page 68 for more information. EQ settings of channel 17 through 24 can not be stored. EQ programs cannot be recalled to input channels 17 through 24. Cannot locate the aux send panpots. Aux send panpots are only available when aux sends are paired. See "Pairing Aux Sends" on page 101 for more information. The bus master level faders work in Probably because the bus outs are paired. See "Pairing Bus Outs" on unison. page 111 for more information. No output from the OMNI OUTs. Cannot send channel signals to the effects processors. The effects send meters indicate that signals are being sent to the effects, but the processed sounds cannot be heard. Check the OMNI OUT source assignments. See "Assigning Omni Outs" on page 116 for more information. If the effects sends are configured post-fader, the regular channel fader must be raised in addition to the aux send fader. See "Using the Effects" on page 123 for more information. Processed signals are returned via the effects returns. See "Returning Processed Signals" on page 124 for more information. Cannot store effects programs. Cannot recall effects programs 19 and 42 to Effect 1. Cannot feed effects return 1 to Effect 1, or effects return 2 to Effect 2. Effects settings cannot be stored to preset programs 1 through 42. Try storing to user programs 43 through 99. See "Storing Effects Programs" on page 133 for more information. These effects programs use the HQ. PITCH and FREEZE type effects and can only be recalled to Effect 2. See "Preset Effects Programs" on page 121 for more information. This is to prevent signal loops. See "Using the Effects" on page 123 for more information. Cannot store dynamics programs. Cannot store to scene memory 00. Cannot store mix scenes. Cannot recall mix scenes. Dynamics settings cannot be stored to preset programs 1 through 40. Try storing to user programs 41 through 80. See "Storing Dynamics Programs" on page 174 for more information. Scene memory 00 is a read-only memory. See "Scene Memory 00" on page 185 for more information. Is the selected scene memory protected? See "Protecting Scene Memories" on page 189 for more information. Only scene memories that contain data can be recalled. Help! I recalled a mix scene by mistake. Use the Undo function to return to the previous mix settings. See "Undoing Mix Scene Recalls" on page 189 for more information. The scene memory number keeps flashing. Recalling a mix scene doesn't update some channels. This is because a scene memory other than the one last recalled has been selected but not recalled. See "Scene Memory Display Area" on page 185 for more information. Perhaps these channels are safe channels? See "Recalling Scene Data Safely" on page 192 for more information. The specified fade time has no effect. Fade Time settings must be stored in mix scenes before they take effect. See "Setting a Fade Time" on page 191 for more information. 01V-Owner's Manual