Yamaha 01V Owner's Manual - Page 282

MIDI Data Format 283 PARAMETER VALUE REQUEST (type 0x00:edit buffer, 0x01:sysytem memory) Reception When [Parameter Change RX] is ON, this message is received if the [Rx CH] matches the Device Channel included in the SUB STATUS. When [Parameter Change ECHO] is ON, this message will be echoed if the device itself did not receive the message. When this message is received, the value of the specified parameter will be transmitted as a Parameter Change message. Transmission When [Parameter Change ECHO] is ON, this message will be transmitted without change if the device itself did not receive the message. STATUS ID No. SUB STATUS GROUOP ID MODEL ID PARAM TYPE DATA EOX 11110000 F0 01000011 43 0011nnnn 3n 00111110 3e 00000100 04 00tttttt tt 0aaaaaaa dd0 0aaaaaaa dd1 0ddddddd dd 11110111 F7 System Exclusive Message Manufacturer's ID No.(YAMAHA) parameter request n=0-15(Device Channel No.1-16) MODEL ID Device code (01V) 00:edit buffer, 01:system memory (type) address( H) high 7 bits of 14 bits address address( L) low 7 bits of 14 bits address count End Of Exclusive The system memory will depend on the address, as follows. 0x0000 - 0x007F : setup memory(128byte) 0x0080 - 0x0147 : backup memory(200byte) 0x0200 : card type(1byte) PARAMETER CHANGE (type 0x02:function call) Reception When [Parameter Change RX] is ON, this message is received if the [Rx CH] matches the Device Channel included in the SUB STATUS. When [Parameter Change ECHO] is ON, this message will be echoed. When this message is received, the corresponding memory/library/table will be recalled/stored/cleared. STATUS ID No. SUB STATUS GROUOP ID MODEL ID PARAM TYPE DATA EOX 11110000 F0 01000011 43 0001nnnn 1n 00111110 3e 00000100 04 00000010 02 0ddddddd dd0 0ddddddd dd1 0ddddddd dd2 11110111 F7 System Exclusive Message Manufacturer's ID No.(YAMAHA) parameter change n=0-15(Device Channel No.1-16) MODEL ID Device code (01V) function call function number channel End Of Exclusive function number channel Tx/Rx 0x00 scene recall 0-99(memory 0-99) 0x7f Tx* /Rx 0x01 eq lib recall 0-79(library 1-80) 0-19,22 Tx/Rx 0x02 dyn lib recall 0-79(library 1-80) 0-13,16-19,22 Tx/Rx 0x03 eff lib recall 0x10 scene store 0x11 eq lib store 0x12 dyn lib store 0x13 eff lib store 0-98(library 1-99) 1-99(memory 1-99) 40-79(library 41-80) 40-79(library 41-80) 42-98(library 43-99) 0,1 0x7f 0-19,22 0-13,16-19,22 0,1 Tx/Rx Rx only Rx only Rx only Rx only Channel 0-11(ch1-12), 12-13(13/14-15/16), 14-15(return 1-2), 16-19(aux 1-4), 22(st mas), 23-30(ch17-24) 0,1(EFF1,2 for eff lib recall/store), 0x7f(current/edit buffer) * [0x00:scene recall] is transmitted only when a program which is not assigned to the program change table has been recalled. In other cases, a program change will normally be transmitted. PARAMETER CHANGE (type 0x02:function call(title)) Reception When [Parameter Change RX] is ON and the [Rx CH] matches the Device Channel included in the SUB STATUS, this message will be received. When [Parameter Change ECHO] is ON, this message will be echoed. When this message is received, the title of the corresponding memory/library will be modified. Transmission Parameter Change messages are transmitted on the [Rx CH] channel in response to a request. STATUS ID No. SUB STATUS GROUOP ID MODEL ID PARAM TYPE DATA EOX 11110000 F0 01000011 43 0001nnnn 1n 00111110 3e 00000100 04 00000010 02 0ddddddd dd0 0ddddddd dd1 0ddddddd dd2 : 0ddddddd ddn 11110111 F7 System Exclusive Message Manufacturer's ID No.(YAMAHA) parameter change or response n=0-15(Device Channel No.1-16) MODEL ID Device code (01V) function call function number title1(If data is empty, TITLEs are not transmitted.) : title-n End Of Exclusive If 01V receives a bulk request for an empty memory, TITLEs are not transmitted. function number 0x30 scene title 0-99(mem 0-99),0x7f(edit buffer) for response 1-99(mem 1-99),0x7f(edit buffer) for Rx 0x31 eq lib title 0-79(library 1-80) for response 40-79(library 41-80) for Rx 0x32 dynamics lib title 0-79(library 1-80) for response 40-79(library 41-80) for Rx 0x33 eff lib title 0-98(library 1-99) for response 42-98(library 43-99) for Rx PARAMETER VALUE REQUEST (type 0x02:function call(title)) Reception When [Parameter Change RX] is ON and the [Rx CH] matches the Device Channel included in the SUB STATUS, this message will be received. When [Parameter Change ECHO] is ON and the 01V itself did not receive the message, the message will be echoed. When this is received, the title of the corresponding memory/library will be transmitted. Transmission When [Parameter Change ECHO] is ON and the 01V itself did not receive the message, the message will be echoed. STATUS ID No. SUB STATUS GROUOP ID MODEL ID PARAM TYPE DATA EOX 11110000 F0 01000011 43 0011nnnn 3n 00111110 3e 00000100 04 00000010 02 0ddddddd dd0 0ddddddd dd1 11110111 F7 System Exclusive Message Manufacturer's ID No.(YAMAHA) parameter request n=0-15(Device Channel No.1-16) MODEL ID Device code (01V) function call function number End Of Exclusive function number 0x30 scene title 0-99(mem 0-99),0x7f(edit buffer) 0x31 eq lib title 0-79(library 1-80) 0x32 dynamics lib title 0-79(library 1-80) 0x33 eff lib title 0-98(library 1-99) 01V-Owner's Manual