Yamaha 01V Owner's Manual - Page 142

138 Chapter 12-Effects Effects Parameters REVERB HALL, REVERB ROOM, REVERB STAGE, REVERB PLATE Hall, room, stage, and plate simulations, all with gates. Parameter Range Description REV TIME INI.DLY HI.RATIO LO.RATIO DIFF. DENSITY E/R DLY 0.3-99.9 s 0.0-500.0 ms 0.1-1.0 0.1-2.4 0-10 0-100% 0.0-100.0 ms E/R BAL. 0-100% GATE LVL ATTACK HOLD OFF, -60 to 0 dB 0-120 ms *1 Reverb time Initial delay before reverb begins High-frequency reverb time ratio Low-frequency reverb time ratio Reverb diffusion (left-right reverb spread) Reverb density Delay between early reflections and reverb Balance of early reflections and reverb (0% = ER, 100% = reverb) Level at which gate kicks in Gate opening speed Gate open time DECAY *2 Gate closing speed HPF Thru, 21 Hz-8.0 kHz High-pass filter cutoff frequency LPF 50 Hz-16.0 kHz, Thru Low-pass filter cutoff frequency 1. 0.02 ms-2.13 s (fs=44.1 kHz), 0.02 ms-1.96 s (fs=48 kHz) 2. 6.0 ms-46.0 s (fs=44.1 kHz), 5.0 ms-42.3 s (fs=48 kHz) EARLY REF. Early reflections. Parameter Range Description TYPE ROOMSIZE LIVENESS INI.DLY DIFF. DENSITY ER NUM. FB GAIN HI.RATIO HPF LPF S-Hall, L-Hall, Random, Revers, Plate, Spring 0.1-20.0 0-10 0.0-500.0 ms 0-10 0-100% 1-19 -99 to +99% 0.1-1.0 Thru, 21 Hz-8.0 kHz 50 Hz-16.0 kHz, Thru Type of early reflection simulation Reflection spacing Early reflections decay characteristics (0 = dead, 10 = live) Initial delay before reverb begins Reverb diffusion (left-right reverb spread) Reverb density Number of early reflections Feedback gain High-frequency feedback ratio High-pass filter cutoff frequency Low-pass filter cutoff frequency 01V-Owner's Manual