Yamaha 01V Owner's Manual - Page 160
DIST->DELAY, MULTI FILTER, Distortion and delay effects in series.
View all Yamaha 01V manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 160 highlights
156 Chapter 12-Effects DIST->DELAY Distortion and delay effects in series. Parameter Range DST TYPE DRIVE MASTER TONE N.GATE DST1, DST2, OVD1, OVD2, CRUNCH 0-100 0-100 -10 to +10 0-20 DLY BAL 0-100% DELAY 0.0-2725.0 ms DLY NOTE *1 FB.GAIN -99 to +99% HI.RATIO FREQ. MOD NOTE DEPTH TEMPO*3 0.1-1.0 0.05-40.00 Hz *2 0-100% 25-300 bps Description Distortion type (DST = distortion, OVD = overdrive) Distortion drive Master volume Tone control Noise reduction Distortion and delay balance (0% = distortion, 100% = delayed distortion) Delay time Used in conjunction with TEMPO to determine DELAY Feedback gain (plus values for normal-phase feedback, minus values for reverse-phase feedback) High-frequency feedback ratio Modulation speed Used in conjunction with TEMPO to determine FREQ. Modulation depth Used in conjunction with NOTE parameters to determine DELAY and FREQ. 1. (Maximum value depends on the tempo setting) 2. 3. For more information about the DELAY, NOTE, and TEMPO parameters, see "Setting Delay, Freq, Note & Tempo Parameters" on page 137. MULTI FILTER Three-band parallel filter (24 dB/octave) Parameter Range TYPE 1 TYPE 2 TYPE 3 FREQ. 1 FREQ. 2 FREQ. 3 LEVEL 1 LEVEL 2 LEVEL 3 RESO. 1 RESO. 2 RESO. 3 HPF, LPF, BPF HPF, LPF, BPF HPF, LPF, BPF 28 Hz-16.0 kHz 28 Hz-16.0 kHz 28 Hz-16.0 kHz 0-100 0-100 0-100 0-20 0-20 0-20 Description Filter 1 type: low pass, high pass, band pass Filter 2 type: low pass, high pass, band pass Filter 3 type: low pass, high pass, band pass Filter 1 frequency Filter 2 frequency Filter 3 frequency Filter 1 level Filter 2 level Filter 3 level Filter 1 resonance Filter 2 resonance Filter 3 resonance 01V-Owner's Manual