3Com 3C13886 Installation Guide - Page 118
Panel and Interface LEDs, Interface Optical Fiber, Table 4-4, Description
UPC - 662705478456
View all 3Com 3C13886 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 118 highlights
3Com Router Module Guide 4.1.10 Panel and Interface LEDs Figure 4-3 100FX MM panel Chapter 4 Figure 4-4 100FX SM panel The following table describes the LEDs on the card panel. Table 4-4 LEDs on the Router 1-Port 100FX MM FIC/100FX SM FIC panel LED Description LINK OFF means no Rx link is present, and ON means an Rx link is present. ACTIVE OFF means no data is being transmitted or received on the interface and blinking means data is being transmitted and/or received. 4.1.11 Interface Optical Fiber The 100FX MM should be connected to multi-mode optical fiber and the 100FX SM to single-mode optical fiber. Because the optical interfaces on both cards are SC-type optical receptacles, you must use the optical fibers with SC-type connectors to connect them. Figure 4-5 SC-type fiber-optic connector 4-9