3Com 3C13886 Installation Guide - Page 95
Panel and Interface LED, Interface Cable, Table 3-31, Description
UPC - 662705478456
View all 3Com 3C13886 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 95 highlights
3Com Router Module Guide Chapter 3 Multifunctional Interface Modules Number of connectors 1 () 2 (ROUTER 2-PORT ADSL OVER POTS MIM) Interface standard ITU-T 992.1 G.DMT ITU-T 992.2 G.Lite ANSI T1.413 Issue 2 Interface rate In ADSL full rate mode (ITU-T 992.1 G.DMT/ANSI T1.413): 8160 kbps (downlink rate) 896 kbps (uplink rate). Cable and the Max. transmission In full rate mode, 1.8 km (1.1 mi.) over the telephone cable segment ( depending on the line quality). Supported service ADSL over the regular telephone line 3.12.3 Panel and Interface LED The following figure illustrates the ROUTER 2-PORT ADSL OVER POTS MIM panel. Figure 3-55 ROUTER 2-PORT ADSL OVER POTS MIM panel The following table describes the LEDs on the card panels. Table 3-31 LEDs on the ROUTER 2-PORT ADSL OVER POTS MIM panel LED Description OFF means the loop is inactive; ON means the loop has been activated and has LINK entered the data mode; blinking means the loop is being activated. OFF means no data is being transmitted or received on the interface and blinking ACT means data is being transmitted and/or received. 3.12.4 Interface Cable The interface cables that the ROUTER 2-PORT ADSL OVER POTS MIM uses are regular telephone cables. 3-51