3Com 3C13886 Installation Guide - Page 88
Router 2-Port CT1/PRI MIM
UPC - 662705478456
View all 3Com 3C13886 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 88 highlights
3Com Router Module Guide Chapter 3 Multifunctional Interface Modules Step 1: On Router 4-Port ISDN-S/T MIM, choose the port for connection; Step 2: Confirm the type of ISDN line provided by the telecom carrier; Step 3: Connect the cable: z If the line is an ISDN U line, adapt it using an NT1 adapter by plugging one end of the S/T interface cable to the S/T port of the NT1 adapter and the other end to the BRI port on Router 4-Port ISDN-S/T MIM; z If the line is an ISDN BRI S/T interface line, directly connect the cable to the BRI port on Router 4-Port ISDN-S/T MIM; Step 4: Power on the Router, and check the LEDs of the corresponding slot on the front panel: ON means that Router 4-Port ISDN-S/T MIM is operating normally and OFF means that the POST of Router 4-Port ISDN-S/T MIM has failed. In the latter case, please contact your agent. 3.10 Router 2-Port CT1/PRI MIM 3.10.1 Introduction I. Router 2-Port CT1/PRI MIMmodule 1/2/4-port channelized T1/PRI interface module serves to transmit/receive and handle T1 data streams, provide CT1 access, and fulfill the function of ISDN PRI. Thereby, one card can be used for multiple purposes. II. 1/2/4-port fractional T1 interface module and module are different in the sense that: z FT1 operating mode supported by T1-F modules allows only one bundle. In other words, the time slots can only be bundled into one nx64 kbps or 56 kbps channel, where n=1-24. However, a CT1 module allows of arbitrary grouping of the 24 channels; z T1-F does not support PRI mode. 3.10.2 Interface Attributes The interface attributes of Router 2-Port CT1/PRI MIM modules are given in the following table: Table 3-26 Interface attributes of Router 2-Port CT1/PRI MIM and modules Attribute Description Connector RJ-45 2 Number of connectors 3-44