3Com 3C13886 Installation Guide - Page 13
Installing/Removing MIM, IV. Removing SIC, I. Tools required, II. Installing MIM
UPC - 662705478456
View all 3Com 3C13886 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
3Com Router Module Guide Chapter 1 Overview Figure 1-2 Installing SIC IV. Removing SIC Follow these steps to remove a SIC: Step 1: Place the rear panel of the Router towards you; Step 2: Turn off the power switch of the Router and unplug the power cord; Step 3: Unplug all the network interface cables connected to the rear panel of the Router; Step 4: Remove the captive screws on both sides of the SIC using the flat-blade screwdriver; Step 5: Pull the SIC outward until it is completely taken out of the Router chassis. 1.5.2 Installing/Removing MIM I. Tools required z Flat-blade screwdriver z ESD-preventive wrist strap and ESD-preventive glove II. Installing MIM Follow these steps to install a MIM: Step 1: Place the rear panel of the Router towards you; Step 2: Turn off the power switch of the Router and unplug the power cord; Step 3: Select a slot and insert the MIM along the guides in the slot until it contacts the rear panel of the Router; Step 4: Fix the MIM into the Router with captive screws; Step 5: Power on the Router, and check the LEDs of the corresponding slot on the front panel: ON means that the MIM is operating normally and OFF means that the POST of the MIM has failed. In the latter case, please contact your agent. 1-5