Adaptec 412R User Guide - Page 155

RAID – 36-Drive Configuration

Page 155 highlights

Advanced Configurations and Cabling 6 Connect the SCSI data cables from the DuraStor 7320SS disk I/O card to the daisy-chain enclosures' SAF-TE disk I/O card as shown in Figure C-15. Power Power Supply Supply Cooling Fans SAFTE Disk I/O Chl 1 Chl 2 SCSI Disk I/O Chl 0 Chl 3 Host I/O P1 P2 P4 P3 CTRL 1 SAFTE CTRL 2 RAID Controller Primary enclosure SCSI Data Cable SCSI Data Cable Power Power Supply Supply Cooling Fans SAFTE Disk I/O Chl 1 Chl 2 Daisy-chain enclosure CTRL 1 SAF-TE CTRL 2 Figure C-15 Enclosure Cabling Diagram 7 Connect a fibre channel data cable(s) from the host system(s) HBA(s) to the host I/O card as indicated in Basic Configuration - DuraStor 7320SS on page 2-13 or Advanced Cabling - DuraStor 7320SS on page C-29. The configuration is complete. Refer to the Storage Manager Pro User's Guide or the Disk Array Administrator User's Guide for instructions on how to set up and configure disk arrays. RAID - 36-Drive Configuration The DuraStor 7320SS can be setup to provide up to a 36 disk drive storage solution. In this configuration you will attach two DuraStor 412R drive enclosures to the primary RAID enclosure which will extend the drive channels (12 drives per channel). 1 Remove the SAF-TE disk I/O card installed in both enclosures. See Replacing an I/O Card on page 5-21 for instructions. 2 Locate the switches on each card and set them as shown in Figure C-16. C-13

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210

C-13
Advanced Configurations and Cabling
6
Connect the SCSI data cables from the DuraStor 7320SS
disk I/O card to the daisy-chain enclosures’ SAF-TE disk I/O
card as shown in
Figure C-15
.
Figure C-15
Enclosure Cabling Diagram
7
Connect a fibre channel data cable(s) from the host system(s)
HBA(s) to the host I/O card as indicated in
Basic Configuration –
DuraStor 7320SS
on page 2-13
or
Advanced Cabling –
DuraStor 7320SS
on page C-29
.
The configuration is complete. Refer to the
Storage Manager Pro
User’s Guide
or the
Disk Array Administrator User’s Guide
for
instructions on how to set up and configure disk arrays.
RAID – 36-Drive Configuration
The DuraStor 7320SS can be setup to provide up to a 36 disk drive
storage solution. In this configuration you will attach two
DuraStor 412R drive enclosures to the primary RAID enclosure
which will extend the drive channels (12 drives per channel).
1
Remove the SAF-TE disk I/O card installed in both enclosures.
See
Replacing an I/O Card
on page 5-21
for instructions.
2
Locate the switches on each card and set them as shown in
Figure C-16
.
SAFTE Disk I/O
SCSI Data Cable
SCSI Data Cable
Chl 1
CTRL 1
CTRL 2
SAF-TE
Chl 2
Power
Supply
Power
Supply
Cooling
Fans
SAFTE Disk I/O
Chl 1
CTRL 1
CTRL 2
SAFTE
Chl 2
Chl 0
Chl 3
P4
P3
P2
P1
SCSI Disk I/O
RAID Controller
Power
Supply
Power
Supply
Cooling
Fans
Host I/O
Primary
enclosure
Daisy-chain
enclosure