Adaptec 412R User Guide - Page 62
Replacing a RAID Controller,
UPC - 760884139691
View all Adaptec 412R manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
DuraStor 412R/6320SS/7320SS Installation and User's Guide Replacing a RAID Controller Note: The RAID controller is hot-swappable. 1 Identify and locate the failed controller. See Chapter 6, Troubleshooting. Controller 1 is the lower controller and Controller 2 is the upper controller, as shown in Figure 5-3. Controller Cover Plate Optional Dual SCSI-to-SCSI RAID Controllers Figure 5-3 Location of RAID Controllers 2 Remove the controller cover plate. Loosen the four thumb screws and pull the plate from the storage subsystem. 3 Pull out on the two latches that secure the controller. 4 Using the latches as handles, carefully pull the controller from the storage subsystem. 5 Install the replacement controller into the storage subsystem. Secure the controller by pressing the latches until they lock into place. 5-4