Adaptec 412R User Guide - Page 18
Replacing a PSU, Be sure that the RAID appliance is level. Check
UPC - 760884139691
View all Adaptec 412R manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Setting Up Your Storage Subsystem 9 Slide one of the rack's mounting rails into the slot on the left side of the RAID appliance's back panel. See Figure 2-4. Push the rail in until it fits the depth of the rack. The rail should mate with mounting slots on the rack's rear vertical member and make the appliance level and tight-fitting. Rear Rack Vertical Member Nut Mounting Nut Screws Figure 2-4 Attaching the Rails 10 Secure the left side rail to the rack's rear vertical member using the screws and nuts. 11 Repeat steps 9 and 10 for the other side rail. Note: Be sure that the RAID appliance is level. Check that you used mounting slots of the same height on both sides of the rack. 12 Reinstall the power supplies. See Replacing a PSU on page 5-14 for detailed instructions. 2-5