Adaptec 412R User Guide - Page 52

describes the status LEDs for this example., Table 4-4

Get Adaptec 412R - DuraStor Storage Enclosure PDF manuals and user guides
UPC - 760884139691
View all Adaptec 412R manuals
Add to My Manuals
Save this manual to your list of manuals

Page 52 highlights

DuraStor 412R/6320SS/7320SS Installation and User's Guide Table 4-4 describes the status LEDs for this example. Table 4-4 Drive Status LEDs - One-Touch Annunciation Example Drive Slot 1 2 3 4 Status LED On On Off Off 5 Off 6 Off 7 Off 8 On 9 On 10 On 11 On 12 On Description Enclosure is in dual-bus mode. SCSI host interface. N/A Switch 1 (A0) is in the DOWN position. This sets the drive SCSI IDs of the slots to IDs 1, 2, 3, 4, 5, 6, 9, 10, 11, 12, 13, 14. It reserves IDs 0 and 7 for the host bus adapter, and SCSI ID 15 for the SAF-TE processor. Switch 6 is in the DOWN position. This sets the BAUD rate for the SAF-TE RS-232 serial port to 9,600. N/A Switch 2 (A1) is in the DOWN position. This sets the drive SCSI IDs of the slots to IDs 1, 2, 3, 4, 5, 6, 9, 10, 11, 12, 13, 14. It reserves IDs 0 and 7 for the host bus adapter, and SCSI ID 15 for the SAF-TE processor. Switch 7 is in the UP position. This sets the Delay Start mode to Disabled. Controller is present. Switch 3 (RD) is in the UP position. This enables RAID addressing and is used when configuring RAID mode (DuraStor 7320SS). Switch 8 is in the UP position. This sets the Remote Start mode to Disabled. Controller is present. 4-8

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
4-8
DuraStor 412R/6320SS/7320SS Installation and User’s Guide
Table 4-4
describes the status LEDs for this example.
Table 4-4
Drive Status LEDs
–
One-Touch Annunciation Example
Drive Slot
Status LED
Description
1
On
Enclosure is in dual-bus mode.
2
On
SCSI host interface.
3
Off
N/A
4
Off
Switch 1 (A0) is in the DOWN position. This
sets the drive SCSI IDs of the slots to IDs 1, 2,
3, 4, 5, 6, 9, 10, 11, 12, 13, 14. It reserves IDs 0
and 7 for the host bus adapter, and SCSI ID
15 for the SAF-TE processor.
5
Off
Switch 6 is in the DOWN position. This sets
the BAUD rate for the SAF-TE RS-232 serial
port to 9,600.
6
Off
N/A
7
Off
Switch 2 (A1) is in the DOWN position. This
sets the drive SCSI IDs of the slots to IDs 1, 2,
3, 4, 5, 6, 9, 10, 11, 12, 13, 14. It reserves IDs 0
and 7 for the host bus adapter, and SCSI ID
15 for the SAF-TE processor.
8
On
Switch 7 is in the UP position. This sets the
Delay Start mode to Disabled.
9
On
Controller is present.
10
On
Switch 3 (RD) is in the UP position. This
enables RAID addressing and is used when
configuring RAID mode (DuraStor 7320SS).
11
On
Switch 8 is in the UP position. This sets the
Remote Start mode to Disabled.
12
On
Controller is present.