Brother International BAS-375E Instruction Manual - English - Page 14

Lubrication

Get Brother International BAS-375E PDF manuals and user guides View all Brother International BAS-375E manuals
Add to My Manuals
Save this manual to your list of manuals

Page 14 highlights

11. Lubrication Chapter 3 INSTALLATION CAUTION Turn off the power switch before starting any cleaning work, otherwise the machine may operated if the foot switch is depressed by mistake, which could result in injury. Be sure to wear protective goggles and gloves when handling the lubricating oil and grease, so that they do not get into your eyes or onto your skin, otherwise inflammation can result. Furthermore, do not drink the oil or eat the grease under any circumstances, as they can cause vomiting and diarrhoea. Keep the oil out of the reach of children. Note G Fill the machine with oil when the oil level is down to about one-third full in the oil sight glass. If oil is not added and the oil drops below this level, there is the danger that the machine may seize during operation. G Be sure to let the machine operate for a while after adding the oil. G Be sure to use Brother-specified machine oil (Nisseki Sewing Lub. 10). 1. Fill the oil tank with sewing machine oil. A q 2. Fill the cooling tank q with silicon oil. B 3. Once or twice a week, fill the rotary hook lubrication tank B with machine oil from lubrication oil hole A until the tank is approximately two-thirds full. If more oil than this is added, oil may leak from the rotary hook. BAS-364E, 366E, 370E, 375E 8

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
8
Chapter 3
INSTALLATION
BAS-364E, 366E, 370E, 375E
Turn off the power switch before starting any cleaning work, otherwise the machine may operated if the foot
switch is depressed by mistake, which could result in injury.
Be sure to wear protective goggles and gloves when handling the lubricating oil and grease, so that they do
not get into your eyes or onto your skin, otherwise inflammation can result.
Furthermore, do not drink the oil or eat the grease under any circumstances, as they can cause vomiting
and diarrhoea.
Keep the oil out of the reach of children.
11. Lubrication
CAUTION
Note
●
Fill the machine with oil when the oil level is down to about one-third full in the oil sight glass. If oil is not added
and the oil drops below this level, there is the danger that the machine may seize during operation.
●
Be sure to let the machine operate for a while after adding the oil.
●
Be sure to use Brother-specified machine oil (Nisseki Sewing Lub. 10).
1. Fill the oil tank with sewing machine oil.
2. Fill the cooling tank
q
with silicon oil.
3. Once or twice a week, fill the rotary hook lubrication tank B with machine oil from lubrication oil hole A until the tank
is approximately two-thirds full. If more oil than this is added, oil may leak from the rotary hook.
q
A
B